Glaze ’N Seal Multi-Purpose Sealer — Clear Water-Based Acrylic
Glaze ’N Seal Multi-Purpose Sealer is a versatile, clear acrylic water-based finish formulated to protect, beautify, and extend the life of a wide range of porous surfaces. Designed for both indoor and outdoor use, it waterseals and enhances unglazed tile, concrete, brick, masonry, stucco, slate, and natural or manufactured stone.
Its breathable, film-forming formula provides excellent resistance to water, oil, grease, acids, and organic stains while remaining UV-stable and non-yellowing. The medium-gloss finish subtly enhances surface color and texture without creating a heavy or artificial appearance.
Extremely easy to apply and maintain, Glaze ’N Seal Multi-Purpose Sealer can also be used as a base coat for interior finishes such as Glaze ’N Seal Acrylic Floor Polish or applied over painted and color-stained surfaces for added protection and improved appearance.
Key Features and Benefits
Water-Based Acrylic Formula — Low-VOC, easy to apply, and cleans up with water for user-friendly application
Excellent Stain Resistance — Repels water, oil, grease, acids, and common organic stains such as food, beverages, and cooking oils
UV-Resistant and Non-Yellowing — Maintains a clear, attractive finish without discoloration when exposed to sunlight
Medium-Gloss Film-Forming Finish — Enhances surface appearance while providing durable protection
Breathable Protection — Allows moisture vapor transmission to help reduce efflorescence and surface damage
Mold and Algae Resistant — Helps inhibit mold and algae growth on treated surfaces
Recoatable for Easy Maintenance — Can be reapplied as needed without stripping for long-term performance
LEED Eligible and Low VOC — Qualifies for LEED project points and supports environmentally responsible building practices
Application and Preparation
Surface Preparation
All surfaces must be clean and free of dirt, oil, wax, grease, efflorescence, and defective paint or sealers. If muriatic acid is used, thoroughly remove all residue and neutralize the surface with Glaze ’N Seal Neutralizing Rinse before sealing.
Application
Apply two or more thin coats without puddling. Allow each coat to dry to the touch before applying the next coat (typically 1–3 hours, depending on conditions).
Downloads\n\n
\n
| SKU | GNS MPS |
|---|---|
| Non-Returnable | Yes |
| Manufacturer | Glaze ‘N Seal |
