Laticrete 9235 Waterproofing Membrane and Anti-Fracture Fabric

Laticrete 9235 Waterproofing Membrane is an easy to install, thin, load-bearing waterproofing membrane designed specifically for the special requirements of ceramic tile, stone and brick installations. It’s a perfect solution for wet areas and continuous water submersion applications.
Laticrete 9235 Waterproofing Membrane is a thin (.02″ [.5mm]), load bearing, flexible, liquid applied waterproofing membrane system consisting of a liquid rubber polymer that is cold applied with an integral reinforcing fabric to provide a seamless waterproof membrane. It’s quickly applied with a paint brush or long nap paint roller to form a flexible, seamless waterproofing membrane that bonds to a wide variety of substrates (including both common and less ordinary commercial substrates).
Equipped with Microban antimicrobial product protection to fight the growth of stain-causing mold and mildew on the waterproofing membrane.
Laticrete 9235 Waterproofing Membrane is available in 2 sizes:

Mini Unit: 2 gallon (7.6 L) jug of liquid and Laticrete Waterproofing/Anti-Fracture Fabric packed together in one pail – covers approx. 75 S/F
Full Unit: 6 gallon (23L) pail of liquid only (Anti-Fracture Fabric Sold separately) – covers approx. 300 S/F

Laticrete 9235 Features:

Safe – no solvents and non-flammable
Interior and exterior use
Vertical and horizontal surfaces (including ceilings)
Thin-only 0.02″ (0.5 mm) thick when cured
Anti-fracture protection of up to 1/8″ (3 mm) over shrinkage and other non-structural cracks
“Extra Heavy Service” rating per TCNA performance levels (RE: ASTM C627 Robinson Floor Test).
IAPMO and ICC Approval
Applies quickly with a paint brush or roller—no special mixing or application equipment needed
Fast cure-normally ready in hours for finishes
Install tile, brick, and stone directly onto membrane
Certified Children and Schools by The GREENGUARD Environmental Institute
Easy cleanup-just use water while fresh
Protects concrete & reinforcing steel from corrosion

Uses

Swimming pools, fountains & water features
Shower pans, stalls and tub surrounds
Bathrooms & laundries (industrial, commercial & residential)
Spas and hot tubs
Kitchens & Food Processing Areas
Terraces & balconies over unoccupied spaces
Countertops
Facades Steam rooms (when used in conjunction with a vapor barrier)

Suitable Substrates:

Concrete
Cement Mortar Bed
Cement Plaster
Concrete and Brick Masonry
Exterior Glue Plywood (Interior Only)
Gypsum Wallboard
Ceramic Tile and Stone
Cement Terrazzo
Cement Backer Board
Gypsum Wallboard (Interior use only, non-wet areas)
Self-Leveling and Patching Compounds\n\n

Specifications

\n

\n

\n

\n

\n

\n