Schluter KERDI-LINE Channel Body Drain

The Schluter KERDI-LINE is a low profile linear floor drain specifically designed for bonded waterproofing assemblies. KERDI-LINE can be installed adjacent to walls or at intermediate locations in showers, wet rooms, and other applications that require waterproofing and drainage.
The Schluter KERDI-LINE Channel Body Drain Features:

Create barrier-free, open-concept spaces
Floors can be sloped on a single plane to KERDI-LINE, enabling the use of large-format tiles
Channel body is made of formed stainless steel and features a KERDI collar to create a secure waterproof connection
Two frame height options available to accommodate different tile covering thicknesses
Off-set and center outlets available
Accommodates all thicknesses of ceramic tiles and stone coverings
Available in lengths ranging from 20″ (50 cm) to 72″ (180 cm)
Grate assemblies sold separately and available in three designs: closed, perforated, and a frameless tileable grate
Can be used with the KERDI-LINE-FC to create a seamless look in applications where multiple drains are installed end-to-end

KERDI-LINE consists of a formed stainless steel channel body and grate assembly (must be purchased separately) or covering support to which tile is applied. The channel body features a standard 2″ (50 mm) no-hub outlet and is attached to the pipe using an appropriate mechanical no-hub coupling. The simple connection to standard drain outlets makes KERDI-LINE suitable for new construction and renovation. KERDI-LINE is available with both center and off-set outlets. The offset outlet is located 8″ (20.3 cm) from the edge of the channel body and provides flexibility when obstacles (e.g., floor joists) are encountered during installation. KERDI-LINE includes a corresponding polystyrene foam channel support to set the drain elevation to the corresponding KERDI-SHOWER-LT/-LTS shower trays. The perimeter of the channel body consists of a bonding flange laminated with a collar made of KERDI. It ensures a simple and secure connection to the bonded waterproofing assembly, both in the floor area and on adjacent walls. KERDI-LINE is available in channel lengths from 20″ to 72″ (50 cm to 180 cm) in 4″ (10 cm) increments. The bonding flange extends approximately 1″ (2.5 cm) beyond the channel on all sides.
KERDI-LINE includes a corresponding polystyrene foam channel support and can be installed in conjunction with the matching KERDI-SHOWER-LT/-LTS sloped trays with integrated KERDI waterproofing or a sloped mortar bed covered with the KERDI waterproofing membrane. The trays are available for wall (-LS) or center (-L) drain placement. Surrounding walls are made waterproof using KERDI or KERDI-BOARD.
The perimeter of the channel body consists of a bonding flange laminated with a collar made of KERDI. It ensures a simple and secure connection to the bonded waterproofing assembly, both in the floor area and on adjacent walls.
The KERDI-LINE Grate Assembly is sold separately and is required for a finished installation.\n\n

Specifications

\n

\n

\n

\n

\n

\n

\n

\n