Glaze ‘N Seal 773 Clear Slate Sealer – Gallon

Glaze ‘N Seal 773 Clear Slate Sealer — Low Gloss. High Protection
Glaze ‘N Seal 773 Clear Slate Sealer is engineered to protect and beautify dense stone and masonry surfaces while preserving their natural character. Its clear, water-based acrylic formulation delivers reliable water repellency and stain resistance without darkening or yellowing the surface.
Designed for slate, flagstone, and quarry tile, this low-gloss, film-forming sealer repels oil, grease, and organic stains while remaining UV stable for long-lasting interior and exterior performance. The breathable formulation helps reduce efflorescence and simplifies ongoing maintenance.
Easy to apply and maintain, Glaze ‘N Seal 773 may also be used as a grout release and serves as an excellent base for interior floor finishes such as Glaze ‘N Seal Floor Polish to extend sealer life and enhance protection.
Key Features and Benefits

Water-Based Acrylic Formula — Low-VOC, nonflammable, and easy to apply with water cleanup
Low-Gloss, Film-Forming Finish — Enhances natural stone appearance while maintaining a subtle, low-sheen look
Superior Stain Protection — Repels oil, grease, cooking oils, and beverage stains to keep surfaces clean and protected
UV-Resistant and Non-Yellowing — Maintains clarity and appearance without discoloration in sunlight
Efflorescence Resistant — Helps reduce salt deposits and surface discoloration caused by moisture migration
Ideal for Dense Stone and Brick — Designed specifically for slate, flagstone, quarry tile, and other dense masonry surfaces
Recoatable and Easy Maintenance — Can be reapplied as needed and maintained easily over time
LEED Eligible and Low VOC — Supports environmentally responsible building practices and qualifies for LEED project points

Application and Preparation
Surface Preparation
Ensure surfaces are clean and free of efflorescence, dirt, oil, wax, grease, and defective coatings. If muriatic acid is used, remove all residue and neutralize with Glaze ’N Seal Neutralizing Rinse before sealing.
Application
Apply two or more thin coats without puddling. Allow each coat to dry to the touch before applying the next (typically 1–2 hours). Apply between 55°F and 80°F. Allow 72 hours curing time before exposure to heavy moisture.
Downloads\n\n

Specifications

\n

\n

\n

\n

\n

\n

\n

\n