Laticrete Hydro Ban Cementitious Waterproof Membrane – 30 lb bag

The Laticrete Hydro Ban Cementitious Waterproof Membrane is a one component, polymer fortified, cement based waterproofing material that mixes with water. This product can be used on walls and floors in wet areas; bathrooms, kitchens, swimming pools, water features and fountains, balconies and terraces over unoccupied space.
Hydro Ban Cementitious Waterproofing Membrane handles negative & positive hydrostatic pressure up to 2 BARS (29 PSI) when applied at 40 Mils (1mm) thick.
Laticrete Hydro Ban Cementitious Waterproof Membrane Features:

Suitable for use in partially tiled applications such as at waterlines, tiled swimming lanes, tiled swimming targets
Flood testing in 2 hours at 70°F (21°C) or higher
Does not require the use of fabric^
Can be used under pool plasters
Bonds directly to metal, PVC and ABS plumbing fixtures
“Extra Heavy Service” rating per TCNA performance levels (RE: ASTM C627 Robinson Floor Test)
Passes ANSI A118.10 Waterproofing
Rapid drying for a faster time to tile
Install tile, brick and stone directly onto membrane
GREENGUARD certified, LEED compliant

Uses:

Interior and exterior
Swimming pools, fountains and water features
Spas and hot tubs
Terraces and balconies over unoccupied spaces

Suitable Substrates:

Concrete
Concrete and Brick Masonry
Cement Mortar Bed
Cement Plaster
Ceramic Tile and Stone
Cement Terrazzo
Cement Backer Board
Gypsum Wallboard (Interior use only, non-wet areas)

Technical Data

Installation:
Surface temperature must be 50 – 90°F (10 – 32°C) during application and for 24 hours after installation. All substrates must be structurally sound, clean and free of dirt, oil, grease, paint, laitance, efflorescence, concrete sealers or curing compounds. Make rough or uneven concrete smooth to a wood float or better finish with a underlayment. Do not level with asphalt based products.Maximum deviation in plane must not exceed 1/4″ in 10 ft (6 mm in 3 m) with no more than 1/16″ in 1 ft (1.5 mm in 0.3 m) variation between high spots. Dampen hot, dry surfaces and sweep off excess water—installation may be made on a damp surface.
Approximate Coverage:

At 40mil (1mm) Thick – 120 ft2 (11.2 m2) (Waterproofing Only)
20mil (.5mm) per coat – 2 Coats

Performance:

Shelf Life: Factory sealed containers of this product are guaranteed to be of first quality for eighteen (18) months.
Packaging: 30 lb (13.6kg Bag)\n\n

Specifications

\n

\n

\n

\n

\n

\n

\n

\n